What manufacturers say about working with Simsan.

"Simsan helped us stabilise coating quality across multiple furniture profiles. Their team understood production realities, not only machine specifications."

"The commissioning and operator training reduced our start-up issues dramatically. The support team stayed until the process was production-ready."

"Their chrome coating guidance improved brightness and reduced rework. The process instructions were practical for our shop floor team."

"We upgraded controls on an older line and gained better fault visibility through the HMI. Maintenance response is much faster now."

"The custom UV curing setup matched our space constraints and output requirement. It felt engineered around our line, not a standard catalogue item."

"Simsan's technical team handled machine installation, trials and training in a very structured way. No surprises on commissioning day."

"The 5-axis spray solution resolved our biggest production challenge — uneven coating on curved profiles. The Simsan team tested thoroughly before installation."

"PLC support brought our old machine back under proper control. The HMI screen is clear and the alarms actually help us locate faults now."

"Chrome coating chemicals and the full process documentation helped our team deliver consistent brightness. The previous supplier never explained the full sequence."

"Simsan's UV coating machine has been running consistently for over a year. The curing alignment and conveyor setup were configured exactly to our production rate."

"We upgraded the automation software on our existing line. Operator errors have reduced significantly and recipe management is now fully structured."

"Installation was completed within the committed timeline. The team ran a thorough commissioning batch before handing over to our production crew."

"The pre-coat and UV chemicals work well with our substrate. Simsan gave us a complete process sheet and troubleshooting guide from day one."

"Our shaped automotive trim components are now coated uniformly. The 5-axis path planning resolved the edge coverage issue we had with manual spraying."

"After the PLC retrofit, our maintenance team can actually read the fault codes clearly. Downtime has dropped and the HMI screens are simple and intuitive."